Membership card design standard size

Position: Home - FAQ
Membership card design standard size
Author: peter ( ZFCARD-Technology Department ) View: 183 times Pubdate: 2018-05-22
now the membership card has been applied very widely, with a lot of line or service industry, such as 
shopping malls, hotels, fitness centers, restaurants, beauty centers, cinemas and so on. But these 
business card printing customers often need to have a membership card design document to the business 
card factory before making a membership card. Often these business card customers do not have design 
documents, if you encounter this situation, and you will not design, you can find a design unit to design 
, or directly to the business card printing manufacturers design. If you can handle the design yourself, 
you can design it yourself, but first you need to know the design standard size of the membership card, 
in order to do a good job in the design of the membership card. Let me tell you about the membership card 
international standard size. 

Who is the standard of membership card : 85. 5 * 54 * 0.76mm; similar to the common bank card, 

the box specifications : 85.5mmx54mm, outer frame specifications : 88.5mmx57m, card fillet is 12 degrees 

if the membership card is convex in the code case, the convex code standard is as follows : 

small convex code is 12 font, available in bold, and contains a maximum of 19 spaces. 
Large convex code for the 18th font, available in bold, including a maximum of 19 spaces. 
The margin of the convex code and the card must be greater than 5mm. 
Convex code can be hot silver or other gold and silver, special requirements can be personalized convex code. 
The position of the convex code is not pressed to the barcode on the back, otherwise the barcode data can 
not be read, and the barcode card sets aside enough space according to its own bar code model. If the 
membership card is a magnetic stripe card, the magnetic stripe and the edge of the inside of the card 
(. Upper and lower ) are 4mm; the width of the magnetic stripe is 12 mm. If the membership card has a 
signature bar : the width of the signature bar is generally 12mm, and can be adjusted according to the 
actual situation, in short, the width of the signature bar does not affect the other the design can be 
adjusted freely. 
GUANGZHOU ZHANFENG SMART CARD TECHNOLOGY CO.,LTD Free call: 400-858-9055

: Kelly : Linda : Denis : Mary : Andy contact with Kelly: kelly contact with Linda: Linda contact with Denis: Denis contact with mary: Mary contact with Andy: Andy